In this final part of our VPN series, we’ll discuss building a VPN over the Internet. More specifically, we will address the impact of Network Address Translation (NAT) on VPN traffic. Quick Review In our prior posts, we built Policy Based, Static Route Based, and Dynamic Route Based VPNs. Let’s take a look below atContinueContinue reading “NSX-T L3 VPNs: VPNs and the effect of NAT”
Tag Archives: Route-Based VPN
NSX-T L3 VPNs: Route Based VPNs – Dynamic Routing
In our previous post, we created a route based VPN utilizing static routes on a Tier-1 (T1) Service Router (SR). Today, we will demonstrate how to utilize route-based VPNs via Dynamic Routing. Dynamic Routing and VPNs In the introduction to our VPN series, we provided a flowchart identifying where a given type of VPN (eitherContinueContinue reading “NSX-T L3 VPNs: Route Based VPNs – Dynamic Routing”
NSX-T L3 VPNs: Route Based VPNs – Static Routing
In our previous post, we showed how you can build a policy based VPN utilizing a T1 SR in NSX-T. Today, we will demonstrate how to utilize a route-based VPN via Static Routing. Before we begin… While the lab topology we’ll use today is nearly identical to what was used for our Policy Based VPNContinueContinue reading “NSX-T L3 VPNs: Route Based VPNs – Static Routing”
LumberjackWizard 