In this final part of our VPN series, we’ll discuss building a VPN over the Internet. More specifically, we will address the impact of Network Address Translation (NAT) on VPN traffic. Quick Review In our prior posts, we built Policy Based, Static Route Based, and Dynamic Route Based VPNs. Let’s take a look below atContinueContinue reading “NSX-T L3 VPNs: VPNs and the effect of NAT”
Tag Archives: Policy-Based VPN
NSX-T L3 VPNs: Policy Based VPNs
In our first post, we provided a L3 VPN scenario and discussed Policy and Route Based VPNs. Following this, we provided a breakdown of our lab environment that we will be using. Today, we will demonstrate how to configure a Policy Based VPN using our scenario. Policy L3 IPSec VPN scenario Simple VPN Scenario (clickContinueContinue reading “NSX-T L3 VPNs: Policy Based VPNs”
NSX-T Layer 3 VPNs – Lab Topology
As we’ll be reusing the scenario of securing communications between our blue VM and green server throughout the coming posts, we wanted to provide a breakdown of the lab topology that will be utilized. Our intent is to allow you to reference this material as desired via this post, rather than re-populating it over andContinueContinue reading “NSX-T Layer 3 VPNs – Lab Topology”
NSX-T Layer 3 VPNs – Introduction
In broad terms, there are two main types of Virtual Private Networking (VPN) offerings in NSX-T: Layer-3 (L3) IPSec VPN Layer-2 (L2) VPN Additionally, there are two subsets of L3 IPSec VPNs: Layer-3 (L3) IPSec VPN Policy Based Route Based Throughout an upcoming series of posts, we will breakdown both Policy Based and Route BasedContinueContinue reading “NSX-T Layer 3 VPNs – Introduction”
LumberjackWizard 