In our first post, we provided a L3 VPN scenario and discussed Policy and Route Based VPNs. Following this, we provided a breakdown of our lab environment that we will be using. Today, we will demonstrate how to configure a Policy Based VPN using our scenario. Policy L3 IPSec VPN scenario Simple VPN Scenario (clickContinueContinue reading “NSX-T L3 VPNs: Policy Based VPNs”
Category Archives: VPN
NSX-T L3 VPNs: Route Based VPNs – Static Routing
In our previous post, we showed how you can build a policy based VPN utilizing a T1 SR in NSX-T. Today, we will demonstrate how to utilize a route-based VPN via Static Routing. Before we begin… While the lab topology we’ll use today is nearly identical to what was used for our Policy Based VPNContinueContinue reading “NSX-T L3 VPNs: Route Based VPNs – Static Routing”
NSX-T Layer 3 VPNs – Lab Topology
As we’ll be reusing the scenario of securing communications between our blue VM and green server throughout the coming posts, we wanted to provide a breakdown of the lab topology that will be utilized. Our intent is to allow you to reference this material as desired via this post, rather than re-populating it over andContinueContinue reading “NSX-T Layer 3 VPNs – Lab Topology”
NSX-T Layer 3 VPNs – Introduction
In broad terms, there are two main types of Virtual Private Networking (VPN) offerings in NSX-T: Layer-3 (L3) IPSec VPN Layer-2 (L2) VPN Additionally, there are two subsets of L3 IPSec VPNs: Layer-3 (L3) IPSec VPN Policy Based Route Based Throughout an upcoming series of posts, we will breakdown both Policy Based and Route BasedContinueContinue reading “NSX-T Layer 3 VPNs – Introduction”
LumberjackWizard 